Linux基础网络设置
查看linux网络参数
- ifconfig—-查看网络接口
> [root@localhost ~]# ifconfigeth1 Link encap:Ethernet HWaddr 00:0C:29:33:4A:0C inet addr:192.168.4.115 Bcast:192.168.4.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe33:4a0c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:8133 errors:0 dropped:0 overruns:0 frame:0 TX packets:5861 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:818322 (799.1 KiB) TX bytes:835205 (815.6 KiB)lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14 errors:0 dropped:0 overruns:0 frame:0 TX packets:14 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:946 (946.0 b) TX bytes:946 (946.0 b)- hostname—-查看主机名
[root@localhost ~]# hostnamelocalhost- route—-查看路由表
[root@localhost ~]# routeKernel IP routing tableDestination Gateway Genmask Flags Metric Ref Use Iface192.168.4.0 * 255.255.255.0 U 1 0 0 eth1default localhost 0.0.0.0 UG 0 0 0 eth1- netstat—查看网络连接情况
-a 所有， -n 数字， -r路由表，-l监听，-t TCP， -u UDP， -p 进程号
[root@localhost ~]# netstat -antput Active Internet connections (servers and established)Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 0.0.0.0:875 0.0.0.0:* LISTEN 2262/rpc.rquotad tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 1963/rpcbind tcp 0 0 0.0.0.0:33073 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:40337 0.0.0.0:* LISTEN 2266/rpc.mountd tcp 0 0 0.0.0.0:53586 0.0.0.0:* LISTEN 2010/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2345/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2084/cupsd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 2590/master tcp 0 0 0.0.0.0:35161 0.0.0.0:* LISTEN 2266/rpc.mountd tcp 0 0 0.0.0.0:2049 0.0.0.0:* LISTEN - tcp 0 0 0.0.0.0:42759 0.0.0.0:* LISTEN 2266/rpc.mountd tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 3041/mysqld tcp 0 756 192.168.4.115:22 192.168.4.105:52347 ESTABLISHED 2788/sshd tcp 0 0 :::111 :::* LISTEN 1963/rpcbind tcp 0 0 :::53461 :::* LISTEN 2266/rpc.mountd tcp 0 0 :::22 :::* LISTEN 2345/sshd tcp 0 0 ::1:631 :::* LISTEN 2084/cupsd tcp 0 0 ::1:25 :::* LISTEN 2590/master tcp 0 0 :::60442 :::* LISTEN 2266/rpc.mountd - Ping —-测试连通性
[root@localhost ~]# ping www.baidu.comPING www.a.shifen.com (123.125.65.78) 56(84) bytes of data.64 bytes from 123.125.65.78: icmp_seq=1 ttl=56 time=141 ms64 bytes from 123.125.65.78: icmp_seq=2 ttl=56 time=18.9 ms64 bytes from 123.125.65.78: icmp_seq=3 ttl=56 time=17.3 ms64 bytes from 123.125.65.78: icmp_seq=4 ttl=56 time=19.9 ms- Nslookup—-测试DNS域名解析
[root@localhost ~]# nslookup> www.baidu.com Server: 192.168.1.1Address: 192.168.1.1#53Non-authoritative answer:www.baidu.com canonical name = www.a.shifen.com.Name: www.a.shifen.comAddress: 123.125.65.78Name: www.a.shifen.comAddress: 123.125.65.82- Traceroute—路由跟踪
[root@localhost ~]# traceroute www.baidu.comtraceroute to www.baidu.com (119.75.218.70), 30 hops max, 60 byte packets 1 192.168.40.1 (192.168.40.1) 1.223 ms 3.555 ms 4.307 ms 2 117.100.128.1 (117.100.128.1) 8.126 ms 8.927 ms 8.623 ms 3 124.205.97.48 (124.205.97.48) 8.430 ms 8.248 ms 8.100 ms 4 219.239.249.25 (219.239.249.25) 7.906 ms 7.953 ms 7.887 ms 5 14.197.177.9 (14.197.177.9) 7.874 ms 14.197.178.45 (14.197.178.45) 7.672 ms 14.197.178.41 (14.197.178.41) 7.485 ms 6 14.197.253.49 (14.197.253.49) 11.445 ms * *配置linux网络参数
一. 临时配置：一般用命令来配置，马上生效，重启无效
- 修改网卡的地址，状态 ifconfig 网络接口名称 IP地址 netmask 子网掩码
[root@localhost ~]# ifconfig eth1 192.168.40.20 netmask 255.255.255.0- ifconfig 网络接口名称 ip地址/子网掩码长度
[root@localhost ~]# ifconfig eth1 192.168.40.20/32- ifconfig eth0 down/up 或者 ifdown/up eth0 或者service network
restart
[root@localhost ~]# ifconfig eth1 down[root@localhost ~]# ifconfig eth1 up[root@localhost ~]# ifdown eth1[root@localhost ~]# ifup eth1[root@localhost ~]# service network restart- ifconfig eth0:0 10.1.1.1 设置启动后生效 复制eth0的配置文件给eth0:0,并进行配置
[root@localhost ~]# ifconfig eth1:0 10.1.1.1 - 添加静态路由：Route add –net ip地址/掩码 gw 下一跳地址
[root@localhost ~]# route add -net 192.148.40.0/32 gw 192.148.40.1- 删除路由：route del –net 目标网段/掩码
[root@localhost ~]# route del -net 192.148.40.0/32- 添加默认网关：route add default gw ip地址 删除默认网关：route del default gw ip地址
[root@localhost ~]# route add default gw 192.168.4.1 [root@localhost ~]# route del default gw 192.168.4.1- Hostname 新主机名 修改后可输入bash调用新的Shell查看，或者exit注销后重新登录
[root@localhost ~]# hostname linuxidc[root@localhost ~]# bash[root@linuxidc ~]# 二. 固定配置：一般是更改配置文件，需要重启生效
- 网卡的配置文件：/etc/sysconfig/network-scripts/ifcfg-ethX。设置ip地址、子网掩码、默认网关等。
DEVICE=eth0 #设备名字ONBOOT=yes #是否随系统启动而启动BOOTPROTO=static （dhcp） # 网络参数配置方式IPADDR=192.168.4.1 #ip地址NETMASK=255.255.255.0 # 子网掩码GATEWAY=192.168.4.2 # 默认网关DNS1=202.106.0.20 # DNS地址- 主机名的配置文件：/etc/sysconfig/network
[root@linuxidc ~]# vim /etc/sysconfig/networkNETWORKING=yesHOSTNAME=localhost- DNS服务器配置文件：/etc/resolv.conf
[root@linuxidc ~]# vim /etc/resolv.conf# Generated by NetworkManagernameserver 192.168.1.1nameserver 192.168.4.1- ip与主机映射：/etc/hosts
[root@linuxidc ~]# vim /etc/hosts127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4::1 localhost localhost.localdomain localhost6 localhost6.localdomain6- 重启所有网卡：service network restart
[root@linuxidc ~]# service network restart- 重启个别网卡：ifdown eth0 ifup eth0
[root@linuxidc ~]# ifdown eth1[root@linuxidc ~]# ifup eth1更多内容请长按二维码关注（更有不定期发红包活动吆^0^）：
转载自:https://www.linuxidc.com/Linux/2016-06/132393.htm
声明: 除非转自他站（如有侵权，请联系处理）外，本文采用 BY-NC-SA 协议进行授权 | 智乐兔
转载请注明：转自《Linux基础网络设置》
本文地址：https://www.zhiletu.com/archives-7325.html
关注公众号：
微信赞赏
支付宝赞赏
鲁公网安备 37011302000311号
